LUMO 18 Printed Parts

DJI O3 and DJI O4 Pro share the same 3D printed parts.

Lumo18 O3 Upgrade Kit Required Parts

Antenna replacement:

• 5.8G IPEX V1 VTX antenna (length: 10 cm) × 2

Screw specifications:

• O3 mounting screws: M1.6 × 10 mm × 4
• Top plate mounting screws: M1.6 × 8 mm × 4
• Camera mounting screws: M2 × 4 mm × 4

Lumo18 O4 Pro Upgrade Kit Required Parts

Antenna replacement:

• 5.8G IPEX V1 VTX antenna (length: 5 cm) × 2

Screw specifications:

• O4 Pro mounting screws: M2 × 6 mm × 4
• Top plate mounting screws: M1.6 × 8 mm × 4
• Camera mounting screws: M2 × 4 mm × 4

Lumo18-O3_O4P Upgrade Parts-Bottom Plate-PLA

Lumo18-O3_O4P Upgrade Parts-Bottom Plate-PLA.stl

image.png

Lumo18-O3_O4P Upgrade Parts-Top Plate-PLA

Lumo18-O3_O4P Upgrade Parts-Top Plate-PLA.stl

image.png

Lumo18 Wide-Angle Lens Camera Side Plate

TPU-Lumo18-O4-W-Camera Side Plate-Black.stl

4053ab3583ea45aab6b4154004ca2de4.png

Lumo18 Racing Rear Wing-TPU-95A

lumo18 racing rear wing.stl

image.png

Lumo18 Rear Wing-TPU-95A

lumo18 rear wing.stl

image.png

Lumo18 Hollow Rear Wing-TPU-95A

lumo18 hollow rear wing.stl

image.png

Lumo18 Lightweight Top Cover (Supports Wide-Angle Lens)-TPU95A

lightweight top cover (supports wide-angle lens).stl

image.png

Lumo18 Wide-Angle Support Print Part

Lumo18 Wide-Angle Support Side Plate-L.stl

lQLPJwUsEoLHVD_NBL3NBXCwvRignrzgzIAJGcW2U5ZgAA_1392_1213.png

Lumo18 Wide-Angle Support Side Plate-R.stl

lQLPJwuscpUMdT_NBLzNBdSwDrxhDd5q0voJGcZbRpN2AA_1492_1212.png